Pinout for the Tail Light module as used in the AE101 GTZ Levin. Part no. --------.
Small red box behind the drivers side boot trim, that illuminates the tail light warning on the gauge cluster when a globe is blown.
The current values that this switches the warning light on can be adjusted (Ie. when installing LED tail light globes etc) by changing two resistors inside. I'll update with more info upon further investigation.
| Description | Wire Colour |
PCB ID | Pin # | Pin # | PCB ID | Wire Colour |
Description | ||
| Bottom Right of Socket Bottom Left of Plug |
N/A | N/A | N/A | 12 | 5 | Gn/R | Top Right of Socket Top Left of Plug |
||
| Brake or Tail Lights | Gn/W | 11 | 4 | Lt Gn/R | |||||
| Reverse Lights | R/Bl | 10 | 3 | G | Brake or Tail lights | ||||
| Lt G | 9 | - | |||||||
| N/A | N/A | N/A | 8 | - | |||||
| Ground | W/Bk | 7 | 2 | R | |||||
| N/A | N/A | N/A | 6 | 1 | N/A | N/A | N/A |